0.5m 8 Port Way DC Power Cable Splitter 5.5mm x 2.1mm CCTV Camera PSU Adapter

Connector Sizes:

External diameter of the DC connector – 5.5mm.
Internal diameter of the DC connector – 2.1mm.

Length of the DC connector (tip to moulded body) – 10mm.
Length of cable from tip to tip – 0.5m (500mm)
Length of cable from socket to splitter block – 60mm
Length of cable from splitter block to male plugs – 400mm

Used for – This cable can be used to connect up to 8 DC powered devices to a single power socket. This cable would be commonly used with CCTV cameras and other electrical devices drawing a low current. Please note that all of the devices combined should not draw more power than the power supply can handle, please see below:
DC Device 1 – 5V & 0.2A (100ma)
DC Device 2 – 5V & 0.2A (100ma)
DC Device 3 – 5V & 0.2A (100ma)
DC Device 4 – 5V & 0.2A (100ma)
DC Device 5 – 5V & 0.2A (100ma)
DC Device 6 – 5V & 0.2A (100ma)
DC Device 7 – 5V & 0.2A (100ma)
DC Device 8 – 5V & 0.2A (100ma)
Power Supply – 5V & 1A (1000ma)
Total Power Available – 5V & 1A (1000ma)
Total Power Used – 5V & 0.8A (800ma)
PLEASE NOTE– Running more power through this cable than your power supply can handle can cause it to blow

Durable PVC jacket and strain relief – This thick jacket helps to protect the cable against wear and tear and the strain relief protects the cable if it is pulled at an angle.
Peace of mind – This cable has been tested to ROHS standards.

Further Information – Most IP cameras have an external diameter DC power socket of 3.5mm so could not be used with this extension lead.